Take Two
$ 11.50
You’ll use two blocks, two tools, and two units to make Take Two, an eye-catching quilt that Deb designed for Marie Bostwick’s 2014 book, Apart at the Seams. You’ll use your Tucker Trimmer 1 and Wing Clipper 1 as you create this gorgeous quilt.
Details
- Project size: 75” x 91”
- Block size: 12" finished
- Required tools: Tucker Trimmer 1, and Wing Clipper 1
- 6 fabrics + border fabric
- Pattern # DTP058
Trade Winds
$ 11.50
This spectacular quilt uses three of Deb's tools: Rapid Fire Lemoyne Star for the stars in the center section, V Block for the pointy units in the pieced borders and Square Squared for the diamond square units in the pieced borders. Together they'll make this quick, easy and successful for everyone! It'll blow you away!
Details
- Project size: 43½" x 43½"
- Block size: 4" and 6"
- Required tools: Rapid Fire Lemoyne Star, V Block, Square Squared
- Recommended tools: Tucker Trimmer 1 or Tucker Trimmer 3
- Pattern # DTP041
Triangle Pizazz Technique Sheet
$ 7.50
The Triangle Pizazz unit is a variation of the Shaded 4 Patch. It can be constructed as identical units to make pinwheels and bow ties, or as mirror image units to create star points as well as other unique creations. As always the unit will be made oversized then trimmed down to reveal a perfectly sized unit with perfectly matched points. Best of all, it was made without cutting or piecing a single triangle. Includes 21 different Triangle Pizazz unit sizes.
Details
- One page, laminated for durability
- Three hole punched
- Companion technique for Tucker Trimmers 1 and 3
- Twenty one unit size options from 2" to 12" finished
- Block and project suggestions included
- Free online video for unit construction and tool trim down
- Left Handed trimdown instructions available for download here
- Item # DTEC19
Video Demonstration
Tucker Trimmer 1
$ 23.50
New & Improved 2019 edition!
The Tucker Trimmer tool was designed to help quilter’s quickly and easily trim down units that are made with triangles: half square triangle squares, quarter square triangle squares (hourglass units), and combinations of half square and quarter square triangle squares (combination units). It has multiple diagonals which allow you to align ruler guide lines with unit seam lines to quickly locate the exact center of pieced units. This makes trim down easy, precise, and perfect every time. No more figuring, or guessing, or struggling to find a center point, and you can see it demonstrated on our free online video demo. I use it for much more than just trimming however and consider it my “must have” tool every time I head to my cutting table.
Details
- Ruler size: 7” x 7”
- Eleven unit size options from 1” finished to 6” finished in half inch increments (trim sizes 1½” to 6½”)
- Step by step illustrated instructions for making half square triangle, hourglass, and combination units. Now available to download!
- Instructions and illustrations for left hand trimming
- Charts for easy conversion of other pattern instructions
- Free online videos for unit construction and tool trim down (see below, also on YouTube)
- Free bonus block pattern
- Numerous companion patterns available
- Item # DT03
Video Demonstrations
Tucker Trimmer 2
$ 23.50
New & Improved 2019 edition!
An “in between” version of the original Tucker Trimmer I tool, this handy ruler allows you to do all of the same functions as the first except that the sizes of the units are in ¼” or ¾” increments. Although these particular sizes are not nearly as popular as the ½” and whole inch increments available on the Tucker Trimmer I, they are sometimes part of your quilting projects. And if you’ve ever tried to trim down a 2¾” hourglass unit you will highly appreciate this tool. The diagonal guidelines on the Tucker Trimmer II will cross precisely at the center of a 2¾” unit so finding the center is a breeze. A great supplemental tool to have in your ruler collection.
Details
- Ruler size - 6½” x 6½”
- Ten unit size options from ¾” finished to 5 ¾” finished in ¼” and ¾” increments (trim sizes 1¼” to 6¼”)
- Step by step illustrated instructions for using the Tucker Trimmer tool to make half square triangle, hourglass, and combination units. Now available to download!
- Instructions for left hand trimming
- Charts for easy conversion of other pattern instructions
- Free online videos for unit construction and tool trim down (see below, also on YouTube)
- Free bonus block pattern
- Numerous companion patterns available
- Item # DT05
Video Demonstration
Tucker Trimmer 3
$ 36.00
New & Improved 2019 edition!
The third in the Tucker Trimmer series of rulers, this version of our Tucker Trimmer is used for any block or unit that is larger than a 6” finished block size. It has all of the sizes of the Tucker Trimmer 1 plus thirteen additional size options up to and including trimming blocks to 13” (that will finish to 12 ½” when sewn). I love to use this tool to trim down my Lemoyne Star blocks made with my Rapid Fire Lemoyne Star tool and any type of block that needs to be trimmed and squared to a specific size. A terrific tool with all the same benefits as the original Tucker Trimmer.
Details
- Ruler size - 13” x 13”
- Twenty four unit size options from 1” finished to 12½” finished in half inch increments (trim sizes 1½” to 13”)
- Step by step illustrated instructions for making half square triangle, hourglass, and combination units. Now available to download!
- Instructions for left hand trimming
- Charts for easy conversion of other pattern instructions
- Free online videos for unit construction and tool trim down (see below, also on YouTube)
- Free bonus block pattern
- Numerous companion patterns available
- Item # DT06
Video Demonstration
Tuckerize It! Stickers
$ 5.95
Our "Tuckerize it!" stickers were a huge hit at both Quilt Market and Festival when we first introduced them. They are 2" in diameter and come 12 stickers to a page. The QR code on the stickers takes you to the Studio 180 Design unit guide.
Tulip Trails
$ 11.50
Time to grab your favorite group of 2” strips and make yourself a field of flowers. Try working with ombre fabric for a fun result, or just some happy, colorful prints. The quilt will look amazing no matter what you choose.
Details
- Project size: 64½” x 70
- Required tools: Star 60
- Fabric: Star Points (medium/dark) and background
- Pattern # Mod030
Tumbleweeds
$ 11.50
Tumbleweeds bouncing across the desert in a stiff breeze. That’s what I think of every time I look at this quilt. Using our Corner Pop II and one simple block, you quickly and easily create a project full of movement that goes together in a snap.
Details
- Three project sizes: Lap, Twin, Queen
- Required tool: Corner Pop II
- Fabric: background, darks (4), accent
- Pattern # Mod023
Tumbling Triangles
$ 11.50
By Combining two contrasting fabrics you will create triangles tumbling down the quilt. Using your V Block tool, this quilt is fun and quick. Just jump right in and give it a whirl!
Designed by the Running with Scissors Quilters.
Details
- Six project sizes, from Wall to Queen
- Required tool: V Block
- Fabric: 2 colors, light and dark
- Pattern # Mod008
Twisted Wedge Star Technique Sheet
$ 7.50
Add a real twist to your Wedge Star projects by cutting diamonds from pieced fabric strips. Your stars will spin either clockwise or counter clockwise and can be varied in oodles of ways. This is a fun next step in creating Wedge Star quilts. The strip sizes in the chart come very close to dividing the diamonds in two equal size strips for a simple Twisted Star.
Details
- One page, laminated for durability
- Three hole punched for storage
- Companion for Wedge Star tool
- Twenty Two unit sizes from 3" to 24" finished
- Free online video for unit construction and tool trim down (available soon!)
- Item # DTEC24
Video Demonstration
Coming soon!
Twister
$ 11.50
A project that constructs the pieced border units at the same time as the pieced block units: definitely a two for one deal! Deb’s construction methods and Tucker Trimmer 1 and Tucker Trimmer 3 tools let you construct all units without cutting or piecing triangle shapes and then gives you the added benefit of trimming down for super high precision. The large setting pieces can easily be trimmed with the Tucker Trimmer III tool. A very simple project to make.
Details
- Project size: 72” x 92”
- Block size: 10” finished
- Required tool: Tucker Trimmer 1
- Highly recommended tool: Quilter’s Magic Wand, Tucker Trimmer 3
- Scrap fabrics in two colorways + accent and background fabric
- Pattern # DTP029
V Block
$ 25.50
This tool is a must have if you like making quilts with these tall star point units. Sometimes known as “Peaky and Spike”, a nickname attached to the unit about 20 years ago by a famous quilter, Doreen Speckman, this particular shape has perplexed quilters forever. With Deb’s tool, which you can see used on our free online video demonstration (see below, also on YouTube), you’ll be cutting the center and side triangles slightly over sized and then with the same tool trimming the sewn piece to an extremely precise unit with seams perfectly placed for crisp, sharp points at every intersection. So think about adding this magnificent new tool to your toolbox, you’ll be glad you did.
Details
- Ruler size: approximately 7” x 11”
- Eleven unit size options from 1” finished units to 6” finished units in half inch increments
- Step by step illustrated instructions, available to download
- Illustrated instructions for left hand cutting and trimming
- Fine lines for higher accuracy
- Free online video for unit construction and tool trim down (see below, also on YouTube)
- Numerous companion patterns available
- Item # DT11
Video Demonstration
Victorious
$ 11.50
Victorious is a beautiful, traditional quilt that uses the V Block units to create stars with the added interest of the diagonal chains of small squares tying the stars together. The V Block units are also used to construct the diamond pieced border, providing a very different look from the stars in the center. Square Squared units are used to create the four corner blocks in the border. A difficult looking but easy to piece project.
Details
- Project size: 55” x 55”
- Block size: 9” finished
- Required tools: V Block Trimmer, Square Squared
- Three fabric project
- Pattern # DTP035
Water Lily
$ 11.50
Are you ready to add a wow factor to your next Rapid Fire Lemoyne Star project? This is it! A slivering construction step allows you to create amazing, spiked Blooming Lemoyne Stars, and the unusual block arrangement adds the extra impact you are looking for.
Details
- Project size: 75" x 75"
- Required tools: Rapid Fire Lemoyne Star, Tucker Trimmer III (the Corner Pop is highly recommended)
- Fabric: medium (scrappy), accent, and background
- Pattern # DTP078
Wedge Star
$ 39.50
The Wedge Star tool is sure to be an exciting addition to your quilting toolbox! Designed to make a variety of different blocks based on 45º sub-units, ranging from simple kaleidoscope blocks to complex stars with diamond points going north, south, east and west. And with 22 different size options and the ability to swap sub-units in and out of blocks, you’ll be able to create virtually unlimited designs. This is a tool guaranteed to keep your creativity flowing, project after project!
As an added benefit, we’ve also included a free bonus project, Freelancer, in the Wedge Star’s instruction set. And with all the possibilities the Wedge Star™ tool offers, this project can truly be yours; just change the size and coloring to make a spectacular project as unique as you are. The quilt size and fabric yardage will, of course, depend on the size blocks you choose.
Details
- 22 block size options: 3” to 24” finished blocks
- Complete step by step illustrated instructions
- Left hand cutting illustrated instructions
- Free online video demonstration (coming soon!)
- Free bonus wall hanging project: Freelancer
- Charts to help determine fabric requirements for future projects
- Fine lines for higher accuracy
- Item # DT18
Video Demonstrations
Whirling Dervish
$ 11.50
When you look up the definition of the word whirling you’ll understand how this quilt received its name. The blocks certainly give the appearance of spinning rapidly around a central point. They are made with strip piecing and my favorite ‘power tool’, the Tucker Trimmer 3. It truly is easy enough for beginners, but interesting enough to engage the most veteran stitchers. So don’t hesitate. You will absolutely love the results.
Details
- Project Size: Lap, Twin, Queen, and King
- Required tools: Tucker Trimmer 3
- Fabrics: Five colors, your choice!
- Pattern # DTP069
Whirling Lemoynes
$ 11.50
Whirling Lemoynes creates a spinning effect that was inspired by those fun whirling flower lawn ornamants. It's a whimsical quilt that teaches you how to piece Lemoynes and 4-pointed stars without paper piecing. You can go scrappy, or use fat eighths, eighth yard cuts, or a Jelly Roll for your Lemoyne Star points.
Details
- 3 Project sizes: Baby, Throw and Twin
- Block size: 6", 9”, or 12"
- Required tools: Rapid Fire Lemoyne Star, Tucker Trimmer 3, Corner Beam
- Scraps/fat eighths/eighth yard cuts + red solid + black solid
- Pattern # Mod005
Wing Clipper 1
$ 25.50
The Wing Clipper is a must have tool if you are making Flying Geese units for your quilt. This tool, and the associated Fast Flying Geese construction technique, allow you to make four finished units from five squares. The best part is that each unit is constructed slightly oversized so each can be trimmed to a perfect size with perfect seam placement once the sewing and pressing are complete by using the Wing Clipper tool. You can see the tool in action on our free online video demonstration below. Every single unit will be exactly right every time. Now who ever thought that would happen with Flying Geese units?!?!
Details
- Ruler size: 5½” x 10½”
- Ten unit sizes from ½” x 1” finished units to 5” x 10” finished units
- Note all sizes on this ruler are based on heights that finish to ½” or whole inch.
- Also the heights increase in half inch increments.
- Step by step illustrated instructions, available to download
- Instructions and illustrations for left hand trimming
- Chart for easy conversions of other patterns and designs
- Fine lines for higher accuracy
- Free online videos for constructions and trim down techniques (see below, also on YouTube)
- Numerous companion patterns available
- Item # DT07
Video Demonstrations
Wing Clipper 2
$ 25.50
An in between tool that trims down Flying Geese units in 9 additional size not covered with the Wing Clipper 1. Many of today’s best designers like to create quilts and patterns with Flying Geese units that are based on finished heights of ¼” and ¾” increments. They are sometimes just the right size for a particular design and having a tool that gives you the opportunity to make them quickly, and then clean them up with high precision, is a welcome addition to many quilter’s tool box. By supplementing the Wing Clipper 1 with this tool, you will have 19 different size options for traditional Flying Geese units. Absolutely the best set of tools on the market!
Details
- Ruler size - 5¼” x 10”
- Nine unit size options from ¾” x 1½” finished size units to 4¾” x 9½” finished size units
- Note all sizes on this ruler are based on heights that finish to ¼” or ¾”.
- Also the heights increase in half inch increments.
- Step by step illustrated instructions, available to download
- Instructions and illustrations for left hand trimming
- Chart for easy conversions of other patterns and designs
- Fine lines for higher accuracy
- Numerous companion patterns available
- Item # DT08
Video Demonstrations
Wish Upon
$ 11.50
A quilt design frequently made with loads of scraps becomes challenging when using a coordinated grouping of colors. With Deb's pattern and a bit of organization, you'll easily be able to make this spectacular quilt. But, if simpler is more your style or you just prefer scrappy, the scrappy version is for you! Both versions included in the pattern.
Details
- Project size: Lap (68" x 80") or Full (80" x 92")
- Block size: 6" finished
- Required tool: Split Rects, Tucker Trimmer 1, and Wing Clipper 1
- 6 fabrics or scrappy fabrics + background + inner/outer border fabrics
- Pattern # DTP056
Yankee Pride
$ 11.50
Constructed from a vast collection of pink and brown fabrics, and using Deb's Wing Clipper 1 tool, this quilt is a superb scrap quilt project. It would be equally charming in many other colorways: purple & green, blue & yellow, red and blue, or simply light and dark batiks! So dig into a collection and have fun making this quilt. Remember the old Yankee saying: “Use it up, wear it out, make it do, or do without!”
Details
- Project size: 69” x 93”
- Block size: 6” & 12” finished
- Required tool: Wing Clipper 1
- Highly recommended tool: Quilter’s Magic Wand
- Scrap fabrics
- Pattern # DTP028
Zen Garden
$ 11.50
Quilt your way to peace, harmony, and balance using your Four Patch Square Up tool. Make these complex looking but easy to make quilt blocks and assemble them into a pleasing pattern to create your own quilted Zen Garden.
Details
- Project sizes: 82" x 82"
- Required tool:Four Patch Square Up tool
- Fabric: 4 Fabrics plus Background
- Pattern # Mod026
Zig Zag Zany
$ 11.50
This energetic quilt design works wonderfully with scraps, fat eighths, fat quarters, solids, small prints, and large prints too! You’ll use our Tucker Trimmer 1 and Wing Clipper 1 tools to construct this vibrant quilt.
Details
- Project size: 66” x 90”
- Required tool: Tucker Trimmer 1 and Wing Clipper 1
- Background with 3 colors of scrap fabrics, focus fabric, and border fabric
- Pattern # Mod001